ChicagoNeighborhood
Mckinley Park zoning — Chicago
4,324 lots, and 58% of them carry one district. Here is what the zoning on the ground looks like — and what outranks it.
Counted from the parcel table the LotGrade analyzer reads, by the City of Chicago’s neighborhood boundary — not the community area, which draws a different and wider line. Zoning rules link to Title 17 in our hosted zoning code.
On the ground
What Mckinley Park is zoned
One district, RS-3, covers 58% of the lots here. That is the number worth knowing first, because it sets what a typical lot here can become before any overlay or relief is considered.
| District | Lots | Share |
|---|---|---|
| RS-3 | 2,511 | 58% |
| RT-4 | 628 | 15% |
| C1-2 | 249 | 6% |
| PMD 8 | 116 | 3% |
| B3-2 | 116 | 3% |
| M1-2 | 111 | 3% |
| C2-2 | 108 | 2% |
| M2-1 | 80 | 2% |
| 28 other districts | 405 | 9% |
The 8 most common of 36 zoning districts among 4,324 lots, counted from the same parcel table the analyzer reads. Planned developments and planned manufacturing districts appear under the number stamped on the map, as PD 30 or PMD 9; each is negotiated on its own terms, so there is no district page behind the number.
The typical lot
What a normal lot here looks like
The median lot in Mckinley Park is 3,096 sq ft; the average is 9,110 sq ft, pulled up by the larger parcels above it. A standard Chicago lot is 25 × 125 ft, or 3,125 sq ft, so the middle of this neighborhood is the standard lot almost exactly.
To see what that allows — setbacks, floor area, height, units, open space and parking, each cited — put the district and the lot size into the Chicago zoning calculator. For the reasoning behind each number, start with floor area ratio and how many units fit.
Overrides
Two rules outrank the district
The district on the map is where the answer starts, not where it ends. In Mckinley Park, two things move it:
- Transit-served locations — 2,931 lots, 68%. Near rail or a listed bus corridor the parking minimum can fall to zero, and density, floor area and height bonuses come into reach. See transit-served development and parking minimums.
- Landmark status — 2 lots. A landmark or a contributing building in a landmark district needs no additional parking to rehabilitate, and demolition is a different conversation entirely.
70 lots are assessed as vacant land. A vacant lot is where the district, the overlay and the block test all apply at once with nothing existing to argue from — and where nonconforming rights give you nothing, because there is nothing to have continued.
Change
How often the map actually moves
8 zoning map amendments have been recorded in the wider Mckinley Park community area between 2019 and 2026 — the City Clerk records a rezoning by community area rather than by neighborhood, so this count covers more ground than the figures above.
A rezoning is the route when the district itself is the obstacle, and it is also what pulls in the Affordable Requirements Ordinance. For the alternatives that do not need one, see variations, special uses and planned developments.
Questions
Common questions
What zoning district is most of Mckinley Park?
RS-3 — 2,511 of 4,324 lots, 58% of its lots. The rest runs to business and commercial districts along the corridors, with a little manufacturing. Every district is explained in the Chicago Zoning Field Guide.
How big is a typical lot in Mckinley Park?
The median is 3,096 sq ft against a standard Chicago lot of 25 × 125 ft (3,125 sq ft) — the standard lot almost exactly. The average is 9,110 sq ft.
Do the 606 block rules apply in Mckinley Park?
No. The Predominance of the Block district covers parts of Logan Square, Humboldt Park, West Town, Avondale and Hermosa, and the matching Pilsen district covers the Lower West Side — not Mckinley Park. Its RS-3 and RT-3.5 lots follow the ordinary district rules. See the 606 and Pilsen block rules for where it does apply.
Can I build without parking in Mckinley Park?
On 2,931 of its lots — 68% — the site is transit-served, and outside downtown that allows the minimum to be reduced by up to 100% (§17-10-0102-B). Elsewhere in the neighborhood the district ratio applies in full.
Where do these numbers come from?
The Cook County and City of Chicago parcel records the LotGrade analyzer reads, counted by the City of Chicago's neighborhood boundary. Zoning rules come from the adopted ordinance, Title 17. Neighborhood lines are a convention rather than a legal boundary — the community area is the official geography — so treat a lot near the edge as belonging to whichever you can verify.
For a real address
Check the real numbers for a real parcel
LotGrade reads every one of these rules against a single address in Mckinley Park — the district, the overlays, the block test and the buildable envelope — and shows whether the numbers work.
The analyzer requires an account — you’ll be asked to sign in. The Zoning Field Guide, the zoning code and these guides are free and need no login.